The wire rods are produced with continuous casting technology mainly for the electrical and steel industries as well as raw material for the drawn wire production of Inotal.
Chemical composition: | According to EN 573-3:
Material can be produced in accordance with ASTM and GOST standards as well. Chemical composition can be changed to meet individual demands. |
---|---|
Diameters: |
|
Tolerance: | +/- 5 % |
Technical and electrical properties: | According to EN 1715-2 (see: Table 1.)The mechanical and electrical properties can be changed upon customer request |
Coil dimensions: | unalloyed
|
alloyed
|
|
Packing: | Horizontal (eye-to-side) or vertical (eye-to-sky) axis on trestle or palett, protected with PE foil and with absorbent silicagel |
Table 1. – The mechanical and electrical properties | ||||||
---|---|---|---|---|---|---|
Alloy designation | Mechanical properties | Electrical properties at 20°C | ||||
Temper | Tensile strength Rm [N/mm2] |
Elongation A/1oo[%] |
Resistivity [Ohm/mm2/m] max. |
Electrical conductivity IACS [%] min. |
||
min. | max. | |||||
EN AW-1350 EN AW-1370 |
H0 | 60 | 80 | 40 | 0,02755 | 63,3 |
H11 | 80 | 95 | 25 | 0,02785 | 61,9 | |
H12 | 95 | 110 | 20 | 0,02801 | 61,5 | |
H13 | 105 | 120 | 16 | 0,02801 | 61,5 | |
H14 | 115 | 130 | 14 | 0,02801 | 61,5 | |
EN AW-6101 | T4 | 150 | – | 23 | 0,035 | 49,2 |
T1 | 170 | 200 | 16 | 0,035 | 49,2 |
All technical delivery conditions are agreed at the time of concluding the contract.
We are ready to meet special customer requirements as well.