Continuous cast EC grade wire rod

Continuous cast EC grade wire rod

The wire rods are produced with continuous casting technology mainly for the electrical and steel industries as well as raw material for the drawn wire production of Inotal.

Continuous cast EC grade wire rod

Chemical composition: According to EN 573-3:
  • EN AW-1350 [EAl 99,5]
  • EN AW-1370 [EAl 99,7]
  • EN AW-6101 [EAlMgSi]
  • EN AW-6101B [EAlMgSi(B)]
  • EN AW-6201 [EAlMg0,7Si]

Material can be produced in accordance with ASTM and GOST standards as well.  Chemical composition can be changed to meet individual demands.
Diameters:
  • Ø 9,5 mm
  • Ø 12 mm
  • Ø 15 mm
Tolerance: +/- 5 %
Technical and electrical properties: According to EN 1715-2 (see: Table 1.)The mechanical and electrical properties can be changed upon customer request
Coil dimensions: unalloyed
  • weight: 2000 kg (max. 2500 kg)
  • width: 850 +/- 20 mm
  • outside Ø: max. 1600 mm
  • inside Ø: 570 +/- 20 mm
alloyed
  • weight: 1300-1500 kg
  • width: 850 +/- 20 mm
  • outside Ø: max. 1100 mm
  • inside Ø: 570 +/- 20 mm
Packing: Horizontal (eye-to-side) or vertical (eye-to-sky) axis on trestle or palett, protected with PE foil and with absorbent silicagel
Table 1. – The mechanical and electrical properties
Alloy designation Mechanical properties Electrical properties at 20°C
Temper Tensile strength Rm
[N/mm2]		 Elongation
A/1oo[%]		 Resistivity
[Ohm/mm2/m]
max.		 Electrical conductivity
IACS [%]
min.
min. max.
EN AW-1350
EN AW-1370		 H0 60 80 40 0,02755 63,3
H11 80 95 25 0,02785 61,9
H12 95 110 20 0,02801 61,5
H13 105 120 16 0,02801 61,5
H14 115 130 14 0,02801 61,5
EN AW-6101 T4 150 – 23 0,035 49,2
T1 170 200 16 0,035 49,2

All technical delivery conditions are agreed at the time of concluding the contract.

We are ready to meet special customer requirements as well.